The Difference Between Rough Cutting And Precision Cutting in The Processing Of Precision Mechanical Components

Nov 06, 2023

Leave a message

The commonly used machining methods in the processing of precision mechanical components are turning and milling parts, and some common precision parts are milling or turning parts. After rough cutting, the entire workpiece is actually very close to the appearance and size required by the workpiece itself. However, there is still a considerable margin on the surface of the workpiece for precision cutting. The surface of the workpiece after precision cutting treatment is smoother and the size will be more accurate.

 

Usually, precision mechanical components can achieve the required appearance and size of the workpiece after one rough cutting and one fine cutting process. However, not all workpieces require only one cutting, and some parts of certain workpieces may require multiple rough cuts. At the same time, there are also some workpieces that do not have high accuracy requirements or have very small cutting quantities, which may only require one precise cutting to meet the requirements of the workpiece.

 

In the processing of precision mechanical components, rough cutting requires greater cutting force than precision cutting due to the large amount of cutting allowance required for the workpiece. This requires the machine, tool, and workpiece to meet the requirements, and rough cutting can quickly remove the allowance, and the surface performance after the effect should not be too rough.

 

The precision cutting of precision mechanical components requires the surface performance and dimensional accuracy of the workpiece to meet the requirements of the workpiece. Therefore, the cutting tools required for precision cutting also need to be very sharp, as the cutting amount is small, so the measurement precision is very high.

 

There are many parts that we cannot see that are inseparable from the processing of precision mechanical components, such as the very small nuts inside mobile phones. These nuts are actually customized according to the needs of mobile phone manufacturers, with almost no standards, and high precision requirements, so almost all rely on precision mechanical processing production.

12007

 

Send Inquiry